Kraun KR.XY User Manual Download Page 201

Page: 201 / 257

201

Manual

www.kraun.it

Mail Exchanger (DYNDNS only) - This is an optional parameter that specifies a Mail Exchanger

(MX) to which the records for a specific domain have to be mailed. use with the hostname being

modified. The specified MX must resolve to an IP address, or it will be ignored. Providing no MX

setting, specifying an MX that does not resolve properly to an IP address, or specifying an MX

for “tzo” will cause the hostname’s MX record(s) to be removed.

Connectiontype (TZO only) - This is an optional parameter that specifies the kind of connectivity

the host has, such as

LAN, Cable modem, or Dial-up modem. This sets the cache time for the hostname at TZO.

Note

You can effectively configure the parameters

mailexchger

offlinesupport

, and

wildcard

only if your service is

www.

dyndns.org

. If you have any other service, configuring these

parameters will not have any effect.

The Dyndns client is trying to registered to dynamic DNS service providers.

Summary of Contents for KR.XY


































































































































































































































































Search results

Summary of Contents for KR.XY

Reviews:

Related manuals for KR.XY

Brands by name

Popular brands

Kraun KR.XY, User Manual

Search results

Summary of Contents for KR.XY

Reviews:

Related manuals for KR.XY

Brands by name

Popular brands