Kraun KR.XY User Manual Download

Page: 244 / 257

244

Manual

www.kraun.it

Click

to return to the Network dialog box, and then click

again.

You may be prompted to install files from your Windows 95/98 installation CD. Follow the

instructions to install the files.

Click

to restart the PC and complete the TCP/IP installation.

Next, configure the PCs to accept IP information assigned by the Integrated Access Device:

Open the Control Panel window, and then click the Network icon.

Select the network component labeled TCP/IP, and then click

Properties

If you have multiple TCP/IP listings, select the listing associated with your network card or

adapter.

In the TCP/IP Properties dialog box, click the IP Address tab.

Click the radio button labeled

Obtain an IP address automatically

Click the DNS Configuration tab, and then click the radio button labeled

Obtain an IP address

automatically

Click

twice to confirm and save your changes.

You will be prompted to restart Windows.

Click

Yes

Windows NT 4.0 workstations

First, check for the IP protocol and, if necessary, install it:

In the Windows NT task bar, click the

Start

button, point to

Settings

, and then click

Control

Panel

In the Control Panel window, double click the Network icon.

In the

Network dialog

box, click the

Protocols

tab.

The

Protocols

tab displays a list of currently installed network protocols. If the list includes TCP/

IP, then the protocol has already been enabled. Skip to step 9.

If TCP/IP does not display as an installed component, click

Add…

In the

Select Network Protocol

dialog box, select

TCP/IP

, and then click

You may be prompted to install files from your Windows NT installation CD or other media.

Follow the instructions to install the files.

After all files are installed, a window displays to inform you that a TCP/IP service called DHCP

can be set up to dynamically assign IP information.

Click

Yes

to continue, and then click

if prompted to restart your computer.

Next, configure the PCs to accept IP information assigned by the Integrated Access Device:

Open the Control Panel window, and then double-click the Network icon.

In the

Network

dialog box, click the

Protocols

tab.

In the

Protocols

tab, select

TCP/IP

, and then click

Properties

Summary of Contents for KR.XY


































































































































































































































































Search results

Summary of Contents for KR.XY

Reviews:

Related manuals for KR.XY

Brands by name

Popular brands

Kraun KR.XY, User Manual

Search results

Summary of Contents for KR.XY

Reviews:

Related manuals for KR.XY

Brands by name

Popular brands