![background image](http://html.mh-extra.com/html/kramer/tp-594rxr/tp-594rxr_user-manual_2001991014.webp)
Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Routing Audio Signals
12
Routing Audio Signals
While video signals are routed from the HDMI input on the transmitter to the HDMI output on
the receiver, audio signals can be routed:
•
Routing Audio Signals from TP-594Txr
•
Routing TP-594Rxr Audio Signals
Routing Audio Signals from TP-594Txr
TP-594Txr
provides two audio signal sources: the HDMI audio input and the analog balanced
audio (when set as source).
•
Routing an Analog Audio Source to the Receiver
•
Routing HDMI Audio Source to the Receiver
•
Routing a Priority-Selected Audio Source to the Receiver
•
Routing an Analog Audio Source to the Receiver for Auto-play when No Video Signal is
Present
Routing an Analog Audio Source to the Receiver
To route the analog audio source to the receiver:
1. Connect an audio source to the AUDIO 5-pin terminal block connector.
2. If required, connect an HDMI source to the HDMI connector.
3. In the
TP-594Txr
Navigation pane, click
Video & Audio
. The Video and Audio settings
page appears.
4. Under Audio Settings:
▪
Set Audio Embedding Selection Mode to
Manual
.
▪
Set Audio Embedding Selection Priority to
Analog
.
▪
View the active audio Current Selection (Analog in this example).
When Audio Embedding Selection Priority on the
TP-594Txr
is set to
Analog
, ARC cannot
be output via the analog AUDIO port.
Figure 8: TP-594Txr Video and Audio Page
– Analog Audio to Receiver Settings
5. In the
TP-594Rxr
Navigation pane, click
Video & Audio
. The Video and Audio settings
page appears.
DRAFT