Kramer TP-594Rxr, User Manual

Page: 18 / 67

Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Routing Audio Signals
16
6. In the TP-594Rxr Navigation pane, click Video & Audio . The Video and Audio settings
page appears.
7. Under Audio Settings:
▪
Set Audio De-embedding Source to Line-HDMI IN .
▪
Set Audio De-embedding Destination to Analog OUT .
When Audio De-embedding Source/Destination is set to None , the analog
AUDIO port is muted.
Figure 16: TP-594Rxr Video and Audio Page
– Analog Audio to Receiver Settings
If ARC Output Source is set to Analog IN , the above settings are automatically set to None
and analog output is disabled.
The TP-594Txr analog audio input is routed to the TP-594Rxr analog audio output and
played on its connected speakers with a black screen on the display.
Routing TP-594Rxr Audio Signals
TP-594Rxr provides several audio sources that are defined via the web pages: the HDMI
OUT ARC, the TOSLINK IN digital input or Analog AUDIO defined as an input.
After defining the ARC source (see Defining the ARC Source on page 16 ), perform the
following operations:
•
Routing HDMI-out ARC signal to AUDIO on TP-594Rxr on page 17 .
•
Routing Audio Return Signals on TP-594Txr on page 17 .
Defining the ARC Source
To define the ARC signal source:
1. In the TP-594Rxr Navigation pane, click Video & Audio . The Video and Audio settings
page appears.
2. Select one of the following source options:
▪
HDMI-out ARC.
▪
Analog IN (defines the AUDIO port on TP-594Rxr as an input, otherwise defined as
an output).
▪
Digital IN (refers to the TOSLINK IN port).
DRAFT