![background image](http://html.mh-extra.com/html/kramer/tp-594rxr/tp-594rxr_user-manual_2001991034.webp)
Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Using the Embedded Web Pages
32
5. Click
Upgrade
.
The new firmware is uploaded, the firmware is upgraded and the system restarts.
Upon completion, the web page refreshes.
Figure 36: The Device Settings Page
– Uploading the New Firmware File
6. Make sure that the new version appears on the Web page lower left side:
Figure 37: The Device Settings Page
– New Firmware Updated
Soft Factory Reset
To reset the device to its factory default parameters (except for IP parameters):
1. In the Navigation pane, click
Device Settings
. The Device Settings page appears.
2. Click
Soft
Factory reset
the following message appears:
Figure 38: Device Settings Page
– Soft Factory Reset Message
3. Click
OK
and wait for the web page to reload following soft factory reset.
Default Communication Parameters
to view other factory reset procedures.
DRAFT