![background image](http://html.mh-extra.com/html/kramer/tp-594rxr/tp-594rxr_user-manual_2001991010.webp)
Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Connecting the TP-594Txr
8
Connecting the TP-594Txr
The example described in this section shows the
TP-594Txr
and
TP-594Rxr
as a transmitter
receiver system although they can be also matched with any market-available HDBaseT
receiver or transmitter, respectively.
Always switch off the power to each device before connecting it to your
TP-594Txr
/
TP-594Rxr
. After connecting your
TP-594Txr
/
TP-594Rxr
, connect its power and then
switch on the power to each device.
Figure 3: Connecting to the TP-594Txr Rear Panel
To connect the TP-594Txr and TP-594Rxr as illustrated in the example in
Connect the inputs and outputs:
1. On
TP-594Txr
:
▪
Connect the HDMI source (for example, an AV receiver) to the HDMI IN connector
.
▪
Connect an audio source (for example, a microphone via the Kramer
102MX
2-channel audio mixer) to the AUDIO 5-pin terminal block connector
.
2. On
TP-594Rxr
:
▪
Connect the HDMI OUT connector
to an acceptor (for example, a smart TV).
▪
Connect the AUDIO 5-pin terminal block connector
to an audio acceptor (for
example, active speakers).
Connect the controls:
3. On
TP-594Txr
, connect a device controller (for example, a laptop) to the CONTROL
RS-232 port
.
5
8
22
25
7
DRAFT