![background image](http://html.mh-extra.com/html/kramer/tp-594rxr/tp-594rxr_user-manual_2001991015.webp)
Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Routing Audio Signals
13
6. Under Audio Settings:
▪
Set Audio De-embedding Source to
Line-HDMI IN
.
▪
Set Audio De-embedding Destination to
Analog OUT
.
When Audio De-embedding Source and/or Destination are set to
None
, the
analog AUDIO port is muted.
Figure 9: TP-594Rxr Video and Audio Page
– Analog Audio to Receiver Settings
If ARC Output Source is set to
Analog IN
, the above settings are automatically set to
None
and analog output is disabled.
The
TP-594Txr
analog audio input is routed to the
TP-594Rxr
HDMI and analog audio
outputs.
Routing HDMI Audio Source to the Receiver
To route the HDMI audio source to the receiver:
1. Connect an HDMI source to the HDMI connector.
2. If required, connect an analog audio source to the AUDIO 5-pin terminal block
connector.
3. In the
TP-594Txr
Navigation pane, click
Video & Audio
. The Video and Audio settings
page appears.
4. Under Audio Settings:
▪
Set Audio Embedding Selection Mode to
Manual
.
▪
Set Audio Embedding Selection Priority to
HDMI
.
▪
View the active audio Current Selection (Embedded in this example).
Figure 10: TP-594Txr Video and Audio Page
– HDMI Audio to Receiver Settings
5. In the
TP-594Rxr
Navigation pane, click
Video & Audio
. The Video and Audio settings
page appears.
DRAFT