50
3
© 2020 KOSTAL Solar Electric GmbH
Installation
Establish LAN connection from KOSTAL Smart Energy
Meter and inverter to the Internet. As an option, the LAN
connection from the inverter can also be connected
directly to the KOSTAL Smart Energy Meter (switch
function).
All KOSTAL solar inverters to be measured and con-
trolled using the KOSTAL Smart Energy Meter must be
set up in the KOSTAL Smart Energy Meter.
Do this by performing the following steps:
1.
Call up online interface of KOSTAL Smart Energy
Meter
2.
Go to Inverter > Devices (manage the inverters used).
3.
Use the plus symbol to add an inverter.
Parameter
Value
Type
Select inverter or allow
inverter to be detected auto-
matically from the IP address.
In this case, the values are
read out from the inverter.
IP address or serial interface
Enter inverter's IP address
or, for PIKO MP plus, select
the RS485 interface they are
connected to on the KOSTAL
Smart Energy Meter. The IP
address can be read out on
the inverter.
Maximum output power
Enter the inverter’s max.
output power. This is required
if a power limitation is set at
the grid connection point and
is to be calculated.
INFO
For details, see the inverter's operat-
ing manual and the KOSTAL Smart
Energy Meter's installation instruc-
tions.
INFO
When an inverter is selected, the pre-
defined default values are adopted.
These can be adapted if necessary.
2
3
4
5
1
