90
5
© 2020 KOSTAL Solar Electric GmbH
Webserver
5.1 Functions of the Reset button
Restarting KOSTAL Smart Energy Meter
Press and hold the RESET button for more than 6 sec-
onds with a sharp object.
The device will then start.
Resetting the online interface password
Press the Reset button as follows:
n
once for a lengthy period (between 3 and 5 seconds)
and then
n
once briefly (half a second).
The gap between the two should be no more than one
second. If the command was detected correctly, the
status LED flashes orange twice. The online interface
password is reset to what it was upon delivery (see type
plate on device).
Resetting the network settings
Press the Reset button as follows:
n
once briefly (half a second) and then
n
once for a lengthy period (between 3 and 5 seconds).
The gap between the two should be no more than one
second. If the command was detected correctly, the
status LED flashes orange twice. One result of resetting
the network settings is that the DHCP is activated.
Resetting KOSTAL Smart Energy Me-
ter to state in which it was delivered
Call up the Webserver. The device is reset by going to
Device settings > Device > Reset device to state in
which it was delivered and clicking on “Reset”.
IMPORTANT
INFORMATION
To log in, you will need the password
from the energy meter’s type plate,
which can be found on the separate
instruction leaflet in the packaging.
IMPORTANT
INFORMATION
After resetting, the default password
applies again. To log in again, you will
need the password from the energy
meter’s type plate, which can be
found on a separate instruction leaflet
in the packaging.
2
3
4
5
1
