59
4
© 2020 KOSTAL Solar Electric GmbH
Operation and operating the device
If a PIKO IQ or PLENTICORE is to be connected to the
RS485 A interface or a PIKO MP plus is to be connected
to the RS485 B interface, no further settings are required
because these devices are already preconfigured for
these interfaces upon delivery.
If you want to make changes to the settings on the
KOSTAL Smart Energy Meter interfaces, you can select
an inverter for the interface under the Modbus settings.
The appropriate values are stored as standard. You can
also adapt the values if necessary.
4.4 Configuring settings
2
3
4
5
1
