manualshive.com logo in svg

Kostal KSEM, Operating Instructions Manual

Share
Download
Kostal KSEM Operating Instructions Manual Download Page 91

91

5

© 2020 KOSTAL Solar Electric GmbH 

Webserver

5.2 Error messages / displays

Status LED is not lighting up

The  KOSTAL Smart Energy Meter is not connected to 
the power supply.

 

n

Ensure that at least the external wire L1 and neutral 
wire N are connected to the  KOSTAL Smart Energy 
Meter.

Status LED is lighting up or flashing red

There is an error.

 

n

Restart  KOSTAL Smart Energy Meter.  
Use a pointed object to press the Reset button for at 
least 6 s.

 

n

Please contact your service technician or installer.

Network LED is not lighting up or the 
 KOSTAL Smart Energy Meter is not be-
ing found in the network

The network cable is not correctly connected to the grid 
connection.

 

n

Ensure that the network cable is correctly connected 
to the grid connection.

The  KOSTAL Smart Energy Meter is not in the same local 
network.

 

n

Connect  KOSTAL Smart Energy Meter with the same 
router / switch.

Serial bus LED is lighting up red or flashing orange

In the user interface check whether there are any error 
messages about communication with the receiver. 

 

n

If necessary, check cabling to receiver.

2

3

4

5

1

Summary of Contents for KSEM



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands