44
3
© 2020 KOSTAL Solar Electric GmbH
Installation
Parameter
Value
Type
Select PIKO MP plus.
Serial interface
Select the RS485 interface
at which the PIKO MP plus
is connected to the KOSTAL
Smart Energy Meter.
Maximum output power
Enter the inverter’s max.
output power. This is required
if a power limitation is set at
the grid connection point and
is to be calculated.
Battery management
Activate battery support.
Serial interface
Select the RS485 interface at
which the battery’s commu-
nication cable is connected
to the KOSTAL Smart Energy
Meter.
Max. depth of discharge
The maximum depth of dis-
charge for the battery should
be set here. Note the details
provided by the battery
manufacturer.
Open advanced settings
RS485 address
Enter the inverter’s RS485
address. This must be unique
for each device and must not
already exist.
5.
Press “OK” button to accept settings.
H
The PIKO MP plus and battery have been set up in
the KOSTAL Smart Energy Meter.
INFO
The preassigned interfaces have to be
switched off beforehand. To do this,
click on the corresponding interface
in the note that appears.
2
3
4
5
1
