
8
1
© 2020 KOSTAL Solar Electric GmbH
General information
Exclusion of liability
Any use that differs from that described in the “Proper
use” chapter or goes beyond the stated intended
purpose is considered inappropriate. The manufacturer
accepts no liability for any damage resulting from this.
Modifications to the energy meter are prohibited. The
energy meter may only be used if it is safe to operate
and is in a technically perfect condition. Any instance
of misuse will result in the termination of the warranty,
guarantee and general liability of the manufacturer.
Only a qualified electrician may open the device.
The device must be installed by a trained electrician
(according to DIN VDE 1000-10 or BGV A3 accident
prevention regulations or an internationally comparable
standard) who is responsible for observing the applicable
standards and regulations.
Work that could affect the electrical power system of
the relevant energy supply company at the site of the
solar power feed-in, may only be carried out by qualified
electricians expressly authorised (licensed) by the energy
supply company. This includes changes to the factory-
preset parameters. The installer must always observe the
regulations of the energy supply company.
Factory settings may only be changed by qualified
electrical installers or persons with at least comparable
or higher technical qualifications, e.g. foremen,
technicians or engineers. When doing so, all
requirements are to be observed.
IMPORTANT
INFORMATION
The KOSTAL Smart Energy Meter
may only be installed, maintained
and repaired by a trained and quali-
fied electrician.
The electrician is responsible for
ensuring that the applicable stand-
ards and regulations are observed
and implemented. Work that could
affect the electrical power system
of the relevant energy supply com-
pany at the site of the solar power
feed-in, may only be carried out
by qualified electricians expressly
authorised (licensed) by the energy
supply company.
This includes changes to the facto-
ry-preset parameters.
2
3
4
5
1