58
4
© 2020 KOSTAL Solar Electric GmbH
Operation and operating the device
4.3 Calling up user interface
The user interface is called up using a standard browser
on a PC, tablet or mobile phone. To do this, enter host
name or IP address of the KOSTAL Smart Energy Meter
in your browser’s address line. The factory-set host
name is made up of the product name and serial num-
ber.
Example: KSEM-712345678
Calling up online interface via net-
work environment in Windows 10
In Windows, in File Explorer click on “Network” or call up
“Devices and Printers” via a search.
An icon with the name of the KOSTAL Smart Energy
Meter (e.g. KSEM--712345678) should be visible. Click
on the KOSTAL Smart Energy Meter’s icon. The stand-
ard browser opens with the KOSTAL Smart Energy
Meter log-on page.
Using HTTPS in the browser
To use the KOSTAL Smart Energy Meter with HTTPS in
the browser, you have to enter “https://” rather than
“http://” in the address line.
1.
Enter the host name or IP address of the KOSTAL
Smart Energy Meter in the browser’s address line.
2.
Press the ENTER key.
P
The login window is opened.
3.
Enter the password and press the ENTER key
H
The KOSTAL Smart Energy Meter’s user interface
opens.
INFO
This function depends on the router
settings and may not be available in
larger administered networks under
some circumstances.
INFO
The target network must also not be
classified in the PC as “Public net-
work” otherwise this function will be
blocked by Windows.
INFO
Because the KOSTAL Smart Ener-
gy Meter’s online interface is not a
website registered on the Internet, the
browser will display it as unsafe.
To call up the online interface any-
way, the browser’s warning must be
ignored and a one-off or permanent
exception added under “Advanced
settings”.
IMPORTANT
INFORMATION
To log in, you will need the password
from the energy meter’s type plate,
which can be found on a separate
instruction leaflet in the packaging.
2
3
4
5
1
