manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 75

71

Recording a new Song

Second-take recording (Overdubbing)

Quick Guide

Second-take recording (Overdubbing)

You may wish to re-record, and add one of the two “grouped” tracks, or overwrite a bad recording
with a new one. Usually, you will record all chord and Style Element changes during the first take, and
record Keyboard tracks and Pads during the second take.

1

Press the REC button to enter Record again. When the Song Record Mode
Select dialog box appears, select Backing Sequence (Quick Record)
again.

2

If you are recording just one of the “grouped” tracks, set the track to be
preserved to the Play mode.

3

Repeat the recording process, and press the 

 (PLAY/STOP) button in the

SEQUENCER 1 section to stop recording and to return to the main page of
the Sequencer mode.

4

While in the main page of the Sequencer mode, press the 

 (PLAY/STOP)

button in the SEQUENCER 1 section to listen to the recorded Song.

Again, the Backing Sequence Song has been converted to an ordinary Song.

Saving a Song to disk

After recording a Song that you like, it is a good idea to save it to disk, to avoid losing it when the
instrument is turned off.

1

While in the main page of the Sequencer mode, press the page menu
icon to open the page menu.

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands