Korg PA1X User Manual Download Page 57

Page: 57 / 424

Song Play

Turning Song tracks on/off

Quick Guide

•

Touch each track’s channel strip, to see each track’s detail in the Track
Info line.

•

Alternatively, you can see the Sound assigned to each track in the Sound
area of the Track 1-8 and Track 9-16 views.

Turning Song tracks on/off

Note:

These changes

will not be saved to the
Song. To save changes,
edit the Song in
Sequencer mode.

During playback, you may wish to mute one or more tracks, for example to sing along with the Song,
or play an instrumental part live on the keyboard.

Muting/unmuting Song tracks works exactly as with Style tracks. See “Turning Style tracks on/off ” on
page 46 for more information.

Selected track

Assigned Sound. Press it to
open the Sound Select win-
dow.

Sound bank

Program Change (if activated -
see “Show Program Change
number” on page 234)

Octave Transpose

Sounds. Names are abbreviated,
to fit the limited space. Press to
open the Sound Select window.

Summary of Contents for PA1X









































































































































































































































































































































































































































Search results

Summary of Contents for PA1X

Reviews:

Brands by name

Popular brands

Korg PA1X, User Manual

Search results

Summary of Contents for PA1X

Reviews:

Brands by name

Popular brands