manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 70

66

Singing with a connected microphone

Applying harmony to your voice

7

Press the Volume tab to select the Volume panel.

8

If you like, start a Style or Song. Adjust the microphone final volume
using the AUDIO IN Assignable Slider.

9

Adjust the other settings, balancing the Style/Song and microphone with
the ACC/SEQ VOLUME slider and the AUDIO IN Assignable Slider.

The settings for the ACC/SEQ VOLUME and AUDIO IN sliders are not saved in memory, so
they stay consistent when selecting different Styles, Performances, Songs or Voice Processor set-
tings.

Applying harmony to your voice

1

Be sure you are in Style Play mode, and select a Style you especially like.

2

Press the Mic tab to show the Microphone panel, and select one of the
available Voice Processor Presets.

 

Note:

 Pitch Correc-

tion and Voice Model-
ing are available as
options.

Voice Processor Presets are settings for the various Voice Processor modules (Effects, Harmony,
Voice Modeling, Pitch Correction, Thickening). By selecting a Preset, all processing parameters
may change.

A Voice Processor Preset is assigned to each Performance or STS. When selecting a different Per-
formance or STS, the Voice Processor Preset may change (depending on the Mic panel lock sta-
tus), changing the type of processing applied to your voice.

 

Note:

 By default, the

first Performance and
STS does not include any
harmony effect, to avoid
any unwanted process-
ing from being applied
to the microphone.
When you select a Preset
you like, you can save it
to a Performance or STS
(see “Saving your set-
tings to a Performance”
on page 37)

3

If you like, start the Style.

4

Check the Harm/Model checkbox, to turn Harmony on.

 

Note:

 By default, you

can turn the Harmony
section on/off by press-
ing the ASSIGNABLE
SWITCH 2, whichever the
shown page is.

5

Play the keyboard, to send chords to the Voice Processor.

6

Sing along with the chords and melody you play on the keyboard.

7

If it is playing, stop the Style.

i

i

Use this pop-up menu 
to select a Voice Pro-
cessor Preset.

Mic panel lock

i

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands