Korg PA1X User Manual Download Page 54

Page: 54 / 424

Song Play

Playing back a Song

Playing back a Song

Once a Song has been selected, it may be played back by the sequencer.

Be sure the BALANCE slider is completely moved to the left (toward
Sequencer 1).

Press the

(PLAY/STOP) button in the SEQUENCER 1 section to star t

playback.

Use the SEQUENCER 1 control section to control the Song’s playback.

When you want to stop the song and go back to the first measure, press
the

(PLAY/STOP) button again.

Note:

In any case, the

sequencer will automati-
cally stop when the end
of the Song is reached.

After pressing the

(PLAY/STOP) button,

the button’s LED turns on, and the measure
counter begins to show the current measure
number.

Press the REWIND button once to go to the

beginning of the current measure. Keep it

pressed to go back several measures.

Press the FAST FORWARD button once to go
to the beginning of the next measure. Keep it
pressed to go forward several measures.

Press the PAUSE button to stop the Song at
the current position. Press it again (or press

PLAY/STOP) to resume playback.

When the Song is
stopped, the LED on the
PLAY/STOP button goes
dark.

Summary of Contents for PA1X









































































































































































































































































































































































































































Search results

Summary of Contents for PA1X

Reviews:

Brands by name

Popular brands

Korg PA1X, User Manual

Search results

Summary of Contents for PA1X

Reviews:

Brands by name

Popular brands