manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 256

252

Global edit mode

Voice Processor Preset: Controls

Voice Processor Preset: Controls

This page allows you to define four continuous and four switch
dedicated controllers for the Voice Processor, to be assigned to
any physical controller (pedal, footswitch, sliders…).

For example, you can first assign the Lead Voice Level to the
“Cnt. Ctl. A” Voice Processor meta-controller, then assign the
“Cnt. Ctl. A” option to an Assignable Pedal or Slider.

Cnt. Ctl A…D

Continuous controllers. See “List of functions assignable to
Voice Processor’s Continuous Controls” on page 381 for a list of
assignable parameters.

Sw. Ctl A…D

Switch controllers. See “List of functions assignable to Voice Pro-
cessor’s Switch Controls” on page 381 for a list of assignable
parameters.

Voice Processor: The optional Pitch
Correction and Voice Modeling modules

Two optional software modules are available for the Voice Pro-
cessor: Pitch Correction and Voice Modeling. These algorithms,
developed by TC•Helicon, are the most sophisticated tools avail-
able today for voice shaping and correction.

You can purchase them as a single optional plug-in (SUG-TC1)
from our web site 

www.korgpa.com

, or by contacting your Korg

Distributor.

To buy a licence for this software option, press the red Buy but-
ton next to each of the parameter names (pages “Preset”,
“Thicken/Pitch Correction” or “Voice Modeling”). The follow-
ing dialog box will appear, showing you your Pa1X Purchase
Code:

Copy this code, and press Cancel to close the dialog box. Type
the code in the dedicated field of the purchase module (online or
on paper, depending on your purchase option).

After receiving the authorization code, open the above dialog

box again, then press the 

 (Text Edit) button in the display,

and type it in the Activation Key field.

Press OK to confirm. Your Pitch Correction and Voice Modeling
modules will become completely functional!

VPp

VPp

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands