manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 261

257

Global edit mode

Page menu

Reference

Page menu

Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.

Write Global-Global Setup

Select this command to open the Write Global-Global Setup dia-
log box, and save global settings that are not tied to a single
operative mode. These settings are programmed in the Global
edit mode.

See “Write Global - Global Setup dialog box” on page 257 for
information on the dialog box.

Write Global-Midi Setup

Select this command to open the Write Global-Midi Setup dia-
log box, and save the current MIDI settings to a MIDI Setup.

See “Write Global - Midi Setup dialog box” on page 257 for
more information.

Write Global-Talk Configuration

Select this command to open the Write Global-Talk Configura-
tion dialog box, and save the current Talk settings (see “Voice
Processor Setup: Talk” on page 244).

See “Write Global - Talk Configuration dialog box” on page 258
for more information.

Write Global-Voice Processor Setup

Select this command to open the Write Global-Voice Processor
Setup dialog box, and save the current Voice Processor Setup set-
tings (see from page 242).

See “Write Global - Voice Processor Setup dialog box” on
page 258 for more information.

Write Global-Voice Processor Preset

Select this command to open the Write Global-Voice Processor
Preset dialog box, and save the current Voice Processor Preset
settings (see from page 245).

See “Write Global - Voice Processor Preset dialog box” on
page 258 for more information.

Write Global-Auto Select Setup

Choose this command to save the preferred Styles, Sounds and
Performances assigned to the control panel STYLE and PER-
FORMANCE/SOUND buttons, via the Auto Select functions
(see page 234).

This way, the next time you will turn the Pa1X on, the preferred
Styles, Sounds and Performances will be still assigned to the rele-
vant buttons.

Write Global - Global Setup dialog box

Open this window by selecting the Write Global-Global Setup
item from the page menu. Here, you can save most settings, pro-
grammed in the Global edit mode, to the Global file in memory.

Parameters saved in the Global Setup area of the Global are

marked with the 

 symbol through the user’s manual. 

Write Global - Midi Setup dialog box

Open this window by selecting the Write Global-Midi Setup
item from the page menu. Here, you can save all MIDI settings
to a MIDI Setup, that is included in the Global file in memory.

Parameters saved in the MIDI Setup area of the Global are

marked with the 

 symbol through the user’s manual. 

Name

Name of the MIDI Setup to be saved. Press the 

 (Text Edit)

button next to the name to open the Text Edit window and mod-
ify the name.

Midi Setup

One of the 8 available MIDI Setup locations, where to save cur-
rent MIDI settings.

Gbl

Mid

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands