manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 61

57

The SongBook

Displaying Artist or Genre

Quick Guide

3

When the entry is visible in the display, select it and press the Select but-
ton in the display.

After selecting an entry, the corresponding Style, SMF, KAR file, or MP3 (optional) will be
recalled, together with the relevant operating mode (Style Play or Song Play). Up to four STSs
will also be recalled.

The selected Style, SMF, KAR file, or MP3 is shown in the higher part of the screen.

Displaying Artist or Genre

For space matter, either the Genre or Artist column can be seen in the display. You cannot see both at
the same time.

1

Press the page menu icon to open the page menu.

 

Note:

 The Artist and

Key fields of all supplied
entries have been inten-
tionally left empty.

2

Choose Show Artist (now Genre) to switch from Genre to Artist in the List
view. The Artist column will be shown.

3

Open the page menu again, and choose the Show Genre (now Ar tist)
item. The Genre column will be shown again.

i

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands