Korg PA1X User Manual Download Page 56

Page: 56 / 424

Song Play

Changing tracks volume

Press TRK. SEL. once again to see tracks 9-16 (Track 9-16 view).

Hint:

As an alterna-

tive, you can change
each track’s volume, by
touching a track’s area
to select it, then using
the TEMPO/VALUE con-
trols to change the vol-
ume.

Press TRK. SEL. again, to return to the Normal view (Keyboard tracks).

Press the

(PLAY/STOP) button to start the Song.

While listening to the Song, switch from Normal view to Track 1-8 and
Track 9-16 view, to see which tracks are playing.

Each track has a sound assigned to it, so look for the name of the Sounds you are listening to.

In Track 9-16 view, the

second group of 8

tracks of the selected

Song are shown, and

can be controlled

using the correspond-

ing Assignable Sliders.

The LED indicator

of tracks 9-16 turns

on.

VOLUME LED
turned on.

Keyboard tracks

Summary of Contents for PA1X









































































































































































































































































































































































































































Search results

Summary of Contents for PA1X

Reviews:

Brands by name

Popular brands

Korg PA1X, User Manual

Search results

Summary of Contents for PA1X

Reviews:

Brands by name

Popular brands