manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 74

70

Recording a new Song

Recording

Recording

1

Select the Style Element you wish to use before starting to play.

2

Start recording, by pressing the START/STOP button.

 

Note:

 If you do not

wish to start the Song
with the Style playing,
you can simply start
recording by pressing
the 

 PLAY/STOP but-

ton in the SEQUENCER 1
section, and start the
Style only later. The Style
will start at the next
strong beat

3

Play as if you were performing live with the Styles.

During recording, select any Style Element (Intro, Variation, Fill, Ending…) you like. You can
also press START/STOP to stop the Style, and press it again to start the Style up again!

Please remember that, while recording in Backing Sequence Record mode, you cannot use the
SYNCHRO, TAP TEMPO/RESET, ACC/SEQ VOLUME controls.

4

When finished recording your Song, press the 

 (PLAY/STOP) button in

the SEQUENCER 1 section to exit recording, and return to the main page
of the Sequencer mode.

5

While in the main page of the Sequencer mode, press the 

 (PLAY/STOP)

button in the SEQUENCER 1 section to listen to the recorded Song.

The Backing Sequence Song has been converted to an ordinary Song. If you like it, you can save
it to disk, and read it in Song Play mode, or with any external sequencer.

6

To edit the Song, press MENU to enter the Edit mode (see instructions
starting from page 178).

Select one of the Intros to start with an introduc-

tion. Select any of the Variations before starting 

to record.

i

After pressing the PLAY/STOP button, the

main page of the Sequencer mode appears

again.

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands