manualshive.com logo in svg

Korg PA1X, User Manual

Share
Download
Korg PA1X User Manual Download Page 31

27

Playing Sounds

Selecting a Sound and playing it on the keyboard

Quick Guide

You can play up to three sounds at the same time on the keyboard. You can also split the keyboard
into two parts, to play up to three sounds with your right hand (Upper), and one with your left hand
(Lower).

Selecting a Sound and playing it on the keyboard

1

Be sure the Upper 1 track is selected and set to play.

 

Note:

 Be sure tracks

Upper 2 and Upper 3 are
muted, and are not play-
ing. If you hear more
than one sound, see
page 29 for how to mute
tracks.

2

If you want to play the Sound on the whole keyboard, be sure the key-
board is in Full Upper mode. If it is split in two par ts, press the FULL
UPPER button in the KEYBOARD MODE section on the control panel.

Playing Sounds

Sound Select section

Keyboard mode (split/full) select 
buttons

i

A selected track is shown with a 
white background. In this example, 
the Upper 1 track is selected. 

If it is 

not selected, press it once to select 
it.

The status icon shows 
that the Upper 1 track 
is set to play. 

If it is 

muted, press the sta-
tus icon to set it to play.

(Full) Upper

Summary of Contents for PA1X









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands