Korenix JetWave 2800 Series, User Manual

Page: 22 / 57

Chapter 5 Management Page 17
System Setup
For users who use the JetWave 2800 for the first time, it is recommended that you begin configuration
from “ System Setup ” shown below:
In System Setup page, there are 2 configuration pages, Basic Setup and Network Setup .
Figure 6 Basic System Settings
Basic Setup:
System Basic
Language : The AP support English language currently.
Device Name : User could give a name for identifying a particular outdoor access point in here.
System Time
System Date: User would like to set the date manually in this item.
System Time: User would like to set the time manually in this item.
Time Synchronization: Time synchronization setting will decide the duration to next time
synchronization. When any NTP server is available in network, user can enable the NTP and
system will automatically synchronize system time with NTP server.
GMT Time zone: Set a Greenwich Mean Time setup for time synchronization.
Time Server: User can insert an available IP address of NTP server in Internet for time
synchronization.