Chapter 5 Management Page 20
(redundant) links to provide automatic backup paths if an active link fails, without the danger of
bridge loops, or the need for manual enabling/disabling of these backup links.
This setting allows you to configure STP
ON
,
OFF
or
Rapid
STP mode.
Ethernet Link Speed
Link
The link speed of Ethernet port can be changed manually into 10/100 Half/Full duplex.
DHCP Server Setting
The
AP can be configured as a DHCP server for a LAN network. Once the DHCP Server is chose
as on, the DHCP server setting elements will spread out on the page.
DHCP Server:
Allows you to enable or disable the DHCP server function in system.
IP Start / End:
The IP Start and End Address specify the range of addresses assigned by your
device when it functions as a DHCP server.
Primary & Secondary DNS
Set the primary and secondary DNS server IP address which DHCP
server is going to assign for DHCP client devices.
Default Gateway
Default gateways IP address assign for DHCP client devices.
Management VLAN
Management VLAN is a secure VLAN which divides Internet users from device IP access.
Administrators can management network devices under the Management LAN network without
betrayal of secrets.
