Chapter 5 Management Page 24
Enable
Network
administrator
can
also
decide
functioning
of
virtual
AP
or
let
it
idle.
WLAN Mode
Radios support “Access Point”, “Wireless Station”, “Access Point (WDS Support)”
and “Wireless Station (WDS Support)” mode to meet various network scenarios.
RTS
“Request to send” is the optional mechanism used by the 802.11 wireless networking
protocol to reduce frame collisions introduced by the hidden node problem. Set the packet size to
trigger RTS/CTS enable. This is normally set in AC side only because the hidden station problem
does not exit from the perspective of the AP. RTS Threshold can be set between 1 and 2312
bytes.
Fragmentation
Set the packet size to activate fragmentation. Fragmentation threshold can be set
between 1 and 2312 bytes.
Note:
Fragmentation setting will be automatically disabled, once the frame aggregation is
enabled.
Limited Data Rate
Limit the wireless data link rate to enhance the stability of data transmission.
VLAN ID
In order to create a wireless VLAN environment, each virtual AP can conform to an
802.1Q VLAN tag ID.
VLAN Priority
Each VLAN ID can be gave a priority number (from 0 to 7) for data process priority.
Client Numbers
Limit the maximum number of associate client devices.
Client Isolation
Client isolation will protect the privacy of each connecting client from searching in
a wireless LAN.
Bandwidth Profile
Choose a bandwidth control profile for virtual AP interface. (About the detail of
bandwidth profile, please refer to the bandwidth control setup in coming pages.)
