Chapter 2 Hardware Installation Page
13
The below figures show the steps to connect the antenna to the antenna sockets.
Connect your antenna with the N-type connector here.
Figure 13 Example of the Connect external Antenna socket:
Connect the Omni-Directional
Antenna to the Antenna Socket.
Most of high gain external antenna is installed in higher place than AP, get low power
lost antenna cable in advance.
Be aware of the force you use while connecting to the N-type connector, inappropriate
force may damage the N-type connector!
Users MUST power the JetWave 2800 off first before connecting the external antenna
to it; otherwise, damage might be caused to the JetWave 2800 itself.
Warning:
Note:
