Chapter 5 Management Page 31
WLAN Mode
Radios support “Access Point”, “Wireless Station”, “Access Point (WDS Support)”,
“Wireless Station (WDS Support)”, “MESH Mode” and “Mobility Mode” mode to meet various network
scenarios.
Frequency Band
Choose a HT20 (channel bandwidth: 20MHz) or HT40 (channel bandwidth: 40MHz)
radio frequency for signal transmission.
Antenna Number
System completes 802.11n 1x1 1-steram and 2x2 2-stream for antenna attached.
The maximum data link rate at 1-steram and 2-stream will be 130Mbps and 300Mbps.
RF Deployment
3 radio operating mode: “
Mesh Uplink
” “
Mesh Downlink
” and “
Mobility Service
” to
define various radio behavior.
Sync. Interval
To define a time period for Mesh nodes synchronizing path information to each other.
Rate Adaptation
To define the up and down gradient of data rate when a data rate is auto or limited.
WMM Setup
Figure 21 Wireless WMM Settings
