Chapter 3 Basic Settings Page 14
Chapter 3 Web Settings
The Web Setting is applied to JetWave 2700/2800 Series.
The MESH and Roaming features are applied to specific models. The JetWave 2700/2800-M means
MESH mode, it supports wireless Mesh network and Fast Roaming feature.
Factory Default Settings
We’ll elaborate the JetWave 2800 factory default settings. You can re-acquire these parameters by
default. If necessary, please refer to the “
Administration
”.
Table 1 JetWave 2800 Factory Default Settings
Features
Factory Default Settings
Username admin
Password admin
Language English
Device Name
FSA
System Operation Mode
Bridge
IP Setup
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Gateway 0.0.0.0
Primary DNS Server
0.0.0.0
Secondary DNS Server
0.0.0.0
Spanning Tree Protocol
Off
Ethernet Link Speed
Auto
DHCP Server
Off
Management VLAN
0 (Disable)
Radio Setup
Radio - 1/2
Wireless Band
802.11ng HT20
Channel
Radio 1: 1 CH - 2412MHz
Radio 2: 6 CH - 2473MHz
Transmission Power
Full
Antenna Number
2
Short Guard Interval
On(400ms)
Aggregation Enable
Distance (x100m)
0
WLAN Setup
Radio-1/2
SSID
Radio 1: wireless_1
Radio 2: wireless_2
(Broadcast Enable)
Enable Yes
WLAN Mode
Access Point
