72
Internal(MSTP)
fa2 Designated Forwarding 200000 128.2 P2P
Internal(MSTP)
MSTP Port
Information
Switch# show spanning-tree mst interface fa1
Interface fastethernet1 of MST00 is Designated Forwarding
Edge Port : Edge (Edge) BPDU Filter : Disabled
Link Type : Auto (Point-to-point) BPDU Guard : Disabled
Boundary : Internal(MSTP)
BPDUs : sent 6352, received 0
Instance Role State Cost Prio.Nbr
Vlans mapped
-------- ---------- ---------- -------- ---------- ---------------------
0 Designated Forwarding 200000 128.1 1,4-
4094
1 Designated Forwarding 200000 128.1 2
2 Designated Forwarding 200000 128.1 3
Multiple Super Ring
Create or
configure a Ring
Switch(config)# multiple-super-ring 1
Ring 1 created
Switch(config-multiple-super-ring)#
Note: 1 is the target Ring ID which is going to be created or
configured.
Delete a Ring
Switch(config-multiple-super-ring)# delete
Ring 1 delete.
Switch(config)#
Note: It will exit from
multiple-super-ring configuration mode
after delete this ring.
Enable a Ring
Switch(config-multiple-super-ring)# start
Start Multiple Super Ring success
Disable a Ring
Switch(config-multiple-super-ring)# stop
Stop Multiple Super Ring success.
Change Ring
name
Switch(config-multiple-super-ring)# name MSR1
Note: Default Ring name is
“Ring1”, 1 is the Ring ID.
Super Ring
Version
Switch(config-multiple-super-ring)# version
default set default to rapid super ring
rapid-super-ring rapid super ring
Switch(config-multiple-super-ring)# version rapid-super-ring
Priority
Switch(config-multiple-super-ring)# priority
<0-255> valid range is 0 to 255
default set default
Switch(config)# super-ring priority 100
Ring Port
Switch(config-multiple-super-ring)# port
IFLIST Interface list, ex: fa1,fa3-5,gi8-10
cost path cost
Switch(config-multiple-super-ring)# port fa1,fa2
Ring Port Cost
Switch(config-multiple-super-ring)# port cost
<0-255> valid range is 0 or 255
default set default (128)valid range is 0 or 255
Switch(config-multiple-super-ring)# port cost 100
<0-255> valid range is 0 or 255
default set default (128)valid range is 0 or 255
Switch(config-super-ring-plus)# port cost 100 200
Set path cost success.
Rapid Dual
Homing
Switch(config-multiple-super-ring)# rapid-dual-homing enable
Switch(config-multiple-super-ring)# rapid-dual-homing disable
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
