46
Group ID: Display Trunk 1 to
Trunk 5 set up in Aggregation
Setting.
Type: Static or LACP set up in
Aggregation Setting.
Aggregated: When LACP links
well, you can see the member
ports in “Aggregated “column.
Individual: When LACP is
enabled, member ports of LACP group which are not connected to correct LACP member
ports will be displayed in the Individual column.
Link Down: When LACP is enabled, member ports of LACP group which are not linked up
will be displayed in the Link Down column.
4.3.6
Command Lines for Port Configuration
Feature
Command Line
Port Control
Port Control – State Switch(config-if)# shutdown -> Disable port state
interface fastethernet1 is shutdown now.
Switch(config-if)# no shutdown -> Enable port state
interface fastethernet1 is up now.
Port Control – Auto
Negotiation
Switch(config-if)# auto-negotiation
Auto-negotiation of port 1 is enabled!
Port Control – Force
Speed/Duplex
Switch(config-if)# speed 100
set the speed mode ok!
Switch(config-if)# duplex full
set the duplex mode ok!
Port Control – Flow
Control
Switch(config-if)# flowcontrol on
Flowcontrol on for port 1 set ok!
Switch(config-if)# flowcontrol off
Flowcontrol off for port 1 set ok!
Port Status
Port Status
Switch# show interface fa1
Interface fastethernet1
Description : N/A
Administrative Status : Enable
Operating Status : Connected
Duplex : Auto (Full)
Speed : Auto (100)
MTU : 2000
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
