24
4.2
Basic Setting
The Basic Setting group provides the way to configure switch information, IP address, User
name/ Password of the system. It also allows you to do firmware upgrade, backup and
restore configuration, reload factory default, and reboot the system.
Following commands are included in this group:
4.2.1 Switch Setting
4.2.2 Admin Password
4.2.3 IP Configuration
4.2.4 Time Setting
4.2.5 Jumbo Frame
4.2.6 DHCP Server
4.2.7 Backup and Restore
4.2.8 Firmware Upgrade
4.2.9 Load Default
4.2.10 System Reboot
4.2.11 CLI Commands for Basic Setting
4.2.1
Switch Setting
It can be assigned System name, Location, Contact and view system information.
Figure 4.2.1.1
– Web UI of the Switch Setting
System Name: Administrator can assign a name to the device. The available character
string length is 64. After configuring the name, CLI system will select the first 12 characters
as the name in CLI system.
System Location: Administrator can specify the switch’s physical location here. The
available character string length is 64.
System Contact: Administrator can specify contact people here. Administrator can type
the name, mail address or other information of the administrator. The available character
string length is 64.
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
