18
4 Feature Configuration
This chapter explains how to configure the Managed Switch’s software features. There are
four ways to access the switch: Serial console, Telnet, Web browser and SNMP.
The Managed Switch Series provides both in-band and out-band configuration methods.
The connectivity of both in-band and out-band is described in previous chapter.
Assign the device an IP address, then this switch can be remotely connected and managed
via its embedded HTML web pages or Telnet console.
The Web management page can be shown at a standard web-browser such as Microsoft
Internet Explorer, or Mozilla, Chrome to configure and interrogate the switch from
anywhere on the network.
Following topics are covered in this chapter:
4.1
Command Line Interface (CLI) Introduction
4.2
Basic Setting
4.3
Port Configuration
4.4
Power Over Ethernet
4.5
Network Redundancy
4.6
VLAN
4.7
Private VLAN
4.8
Traffic Prioritization
4.9
Multicast Filtering
4.10
SNMP
4.11
Security
4.12
Warning
4.13
Monitor and Diagnostic
4.14
Device Front Panel
4.15
Save
4.16
Logout
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
