79
Untagged or Tagged here.
Figure 4.6.2.3 Static VLAN Configuration table. The new VLAN 3 is created. VLAN name is
“ test”. Egress rules of the ports are not configured now.
Figure 4.6.2.4 Configure Egress rule of the ports.
-- : Not available
U: Untag: Indicates that egress/outgoing frames are not VLAN tagged.
T : Tag: Indicates that egress/outgoing frames are to be VLAN tagged.
Steps to configure Egress rules: Select the VLAN ID. Entry of the selected VLAN turns to
light blue. Assign Egress rule of the ports to U or T. Press Apply to apply the setting. If you
want to remove one VLAN, select the VLAN entry. Then press Remove button.
4.6.3
GVRP configuration
GVRP allows users to set-up VLANs
automatically rather than manual
configuration on every port of every
switch in the network. In low volume
and stable network, the GVRP can
reduce the configuration effort. For
high volume and high secure request
network, the Static VLAN configuration
is always preferred.
GVRP Protocol: Allow user to
enable/disable GVRP globally.
State: After enable GVRP globally, here
still can enable/disable GVRP by port.
Join Timer: Controls the interval of
sending the GVRP Join BPDU. An instance of this timer is required on a per-Port, per-
GARP Participant basis
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
