63
To configure the MSTP setting, the STP Mode of the STP Configuration page should be
changed to MSTP mode first.
After enabled MSTP mode, then you can go to the MSTP Configuration pages.
MSTP Region Configuration
This page allows configure the Region Name and
its Revision, mapping the VLAN to Instance and
check current MST Instance configuration. The
network can be divided virtually to different
Regions. The switches within the Region should
have the same Region and Revision leve.
Region Name: The name for the Region. Maximum
length: 32 characters.
Revision: The revision for the Region. Range: 0-
65535; Default: 0)
Once you finish your configuration, click on Apply
to apply your settings.
Add MSTP Instance
This page allows mapping the VLAN to Instance and assign priority to the instance. Before
mapping VLAN to Instance, you should create VLAN and assign the member ports first.
Please refer to the VLAN setting page.
Instance ID: Select the Instance ID, the available number is 1-15.
VLAN Group: Type the VLAN ID you want mapping to the instance.
Instance Priority: Assign the priority to the instance.
After finish your configuration, click on Add to apply your settings.
MSTP Instance Configuration
This page allows you to see the
current MST Instance Configuration
you added. Click on “Apply” to apply
the setting. You can “Remove” the
instance or “Reload“ the
configuration display in this page.
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
