27
identical default IPv6 address. (ex: 00:12:77:FF:88:88 -> fe80::212:77ff:feff:8888)
IPv6 Address: a new IPv6 address can be assigned in this field.
Prefix: the size of the subnet or network, and is equivalent to the subnet mask, but
expressed in a different way. The default length of the subnet mask is 64bits, and written in
decimal value - 64.
Add: after adding new IPv6 address and prefix, do not forget to click icon -“Add” to apply
new address to the system.
Remove: select existing IPv6 address and click icon -“Remove” to delete IP address.
Reload: refresh and reload IPv6 address listing.
IPv6 Neighbor Table: it shows the IPv6 address of the neighboring, connected interface,
MAC address of the remote IPv6 device, and the current state of the neighboring devices.
The system will update IPv6 Neighbor Table automatically, and user also can click the icon
“
Reload” to refresh the table.
4.2.4
Time Setting
Time Setting source allow user to set the time manually or through NTP server. Network
Time Protocol (NTP) is used to synchronize computer clocks on the internet. An administrator
can configure NTP settings here to synchronize the clocks of several switches on the network.
The IEEE1588 PTP (Precision Time Protocol) supports very precise time synchronization
in an Ethernet network. There are two clocks, Master and Slave. The master device
periodically launches an exchange of messages with slave devices to help each slave clock
Summary of Contents for JetNet 6910G-M12 Series
Page 5: ...1 5 4 About Korenix 141...
