Kontron CP6500-V, User Manual

Page: 83 / 192

CP6500-V Configuration
ID 28945, Rev. 01 © 2005 Kontron Modular Computers GmbH Page 4 - 3
P R E L I M I N A R Y
2894
5.01.UG.VC.050304/09095
4
4. Configuration
4.1 Jumper Description
4.1.1 CompactFlash Configuration
The default setting is indicated by using italic bold.
4.1.2 CompactFlash Power Configuration
The default setting is indicated by using italic bold.
4.1.3 Clearing BIOS CMOS Setup
If the system does not boot (due to, for example, the wrong BIOS configuration, or wrong pass-
word setting), the CMOS setting may be cleared using jumper JP1.
Procedure for clearing CMOS setting:
The system is booted with the jumper in the new, closed position, then powered down again.
The jumper is reset back to the normal position, then the system is rebooted again
The default setting is indicated by using italic bold.
Table 4-1: CompactFlash Configuration
R199 / J16 DESCRIPTION
Open Configured for master
Closed Configured for slave
Table 4-2: CompactFlash Power Configuration
R215 R218 DESCRIPTION
Open Closed 5 V
Closed Open 3.3 V
Table 4-3: Clearing BIOS CMOS Setup
J21 DESCRIPTION
Open Normal boot using the CMOS settings
Closed Clear the CMOS settings and use the default values