Kontron CP6500-V, User Manual

Page: 52 / 192

Functional Description CP6500-V
Page 2 - 18 © 2005 Kontron Modular Computers GmbH ID 28945, Rev. 01
P R E L I M I N A R Y
2894
5.01.UG.VC.050304/09095
2
Figure 2-7: EIDE Interface Connectors J19 and J20
There are two independent EIDE ports available. The primary port is connected to the 44-pin,
2-row male connector, J19, and to the onboard CompactFlash socket, J14. The secondary
EIDE interface is a 40-pin, 2-row male connector, J20, AT standard interface for an EIDE hard
disk. This interface is also available at rear I/O.
The onboard 2.5" HDD can be installed on the 44-pin connector.
Each EIDE interface provides support for two devices (one master and one slave) and the two
EIDE interfaces together support a maximum of 4 devices. All hard disks can be used in
cylinder head sector (CHS) mode with the BIOS also supporting the logical block addressing
(LBA) mode.
2
1 43
J19
1
2
39
40
J20
44