Kontron CP6500-V, User Manual

Page: 32 / 192

Introduction CP6500-V
Page 1 - 14 © 2005 Kontron Modular Computers GmbH ID 28945, Rev. 01
P R E L I M I N A R Y
2894
5.01.UG.VC.050304/09095
1
HW Monitoring
LEDs System status:
• TH (green): Overtemperature Status, when remains lit during boot-up, it
indicates a power failure.
• WD (green): Watchdog, when remains lit during boot-up, it indicates a PCI
reset is active.
Fast Ethernet status:
• ACT (green): network activity
• SPEED (green / orange): network speed
General Purpose LEDs:
• I (green): General Purpose or POST code
• II (green): General Purpose or POST code
Watchdog Software configurable two-stage watchdog with programmable timeout ranging
from 125 msec to 256 sec in 12 steps generates IRQ, NMI, or hardware reset.
Thermal Management CPU overtemperature protection is provided by:
• CPU shut down via hardware monitor
• Custom-designed heat sinks
System Monitor Integrated HW monitoring in Winbond Super I/O W83627HF for the supervision
of:
•
Several system power voltages
•
Two fan speed input
•
CPU and system temperature
S
oftware
Software BIOS
AMI BIOS with 1 MB of Flash memory and having the following features:
•
QuickBo
ot
•
QuietBoot
•
BootBlock
•
LAN boot capability for diskless systems (standard Etherboot / PXE on
demand)
•
Boot from USB devices
•
BIOS boot support for USB keyboards
•
Plug and Play capability
•
BIOS parameters are saved in the EEPROM
•
Board serial number is saved within the EEPROM
•
PC Health Monitoring
•
ACPI
Operating Systems Operating systems supported:
• Microsoft Windows 2000
• Microsoft Windows XP
• Microsoft Windows XP Embedded
• Linux
• VxWorks
Table 1-2: CP6500-V Main Specifications (Continued)
CP6500-V SPECIFICATIONS