Kontron CP6500-V, User Manual

Page: 48 / 192

Functional Description CP6500-V
Page 2 - 14 © 2005 Kontron Modular Computers GmbH ID 28945, Rev. 01
P R E L I M I N A R Y
2894
5.01.UG.VC.050304/09095
2
2.2.12.3 CRT Interface and Connector J10
Figure 2-4: D-SUB CRT Connector J10
The 15-pin female connector J10 is used to connect a CRT monitor to the CP6500-V board.
Table 2-9: CRT Connector J10 Pinout
PIN SIGNAL FUNCTION I/O
1 Red Red video signal output O
2 Green Green video signal output O
3 Blue Blue video signal output O
4 NC Not connected --
5 GND Signal ground --
6 GND Signal ground --
7 GND Signal ground --
8 GND Signal ground --
9 VCC Power +5V, 200 mA, no fuse protection O
10 GND Signal ground --
11 NC Not connected --
12 Sdata
I
²
C data
I/O
13 Hsync Horizontal sync. TTL Out
14 Vsync Vertical sync. TTL Out
15 Sclk
I
²
C clock
O
15
6
10
11
1
5