KONRAD 600B SERIES INSTALLATION GUIDE
JANUARY 2019 - V4.0
PAGE 69
14.1a Grease and slide thrust washer onto pro-
peller shaft.
NOTE
:
Tapered end of thrust washer must be
towards the drive.
14.2a Grease splined area and the threads of the
propeller shaft.
14.3a Place the propeller on the propeller shaft
followed by the appropriate hardware (see
below).
Step 14(a): 620B Propeller Installation
14.4a Torque the propeller nut, using a 1 7/16”
socket tool, to 80 lb. ft. (109 Nm). When
approaching 80 lb. ft. (109 Nm), make sure
that the tabs on the tabbed retaining washer
(at least 2 out of 6) line up with the grooves
in the splined washer/hub.
NOTE:
A block of wood can be placed
between the propeller and the lower drive
housing to prevent the propeller from
spinning, while torquing the propeller nut.
14.5a Bend over the tabs using appropriate tools.
Description
Qty
Part #
A ............Prop shaft (L) OR .......... 1 .........10-360
Prop shaft (R) ................. 1 .........10-363
B ............Forward thrust hub ......... 1 .........10-292
C ............Propeller ......................... 1 ........ variable
D ............Splined washer ............... 1 .........10-293
E ............Tab washer ..................... 1 .........10-295
F ............Propeller nut .................. 1 .........10-296
