KONRAD 600B SERIES INSTALLATION GUIDE
JANUARY 2019 - V4.0
PAGE 21
Step 6: Oil Reservoir Installation (continued)
6.5
Place one end of the hose onto the brass “T”
fitting. (Remote Mount only)
To Oil
Bottle
To Stern
Drive
To Gimbal
Carrier
UP
6.8
Fill oil reservoir to “Fill” line using Konrad
High Performance Gear Lubricant. Available in a
1qt (.946 L)bottle (13-090) or 2.5 gallon (9.46 L)
bottle (13-091).
6.7
Apply blue
Loctite
to the center fitting on
the transom assembly. Install oil supply hose with
the adapter fitting onto transom fitting and tighten.
Route other end of hose to the final location on the
“T” fitting.
NOTE: Oil hose should be cut to length for
easiest downward flow to both the drive and the
gimbal carrier.
6.6
Connect the opposite end of the oil supply
hose to the barbed fitting on the gimbal carrier and
secure with a hose clamp. (Remote Mount only)
