Konica Minolta IC-203, User Manual

Page: 168 / 432

PCL Printer Driver Setting (Windows) 8
IC-203 8-30
Output - Copies
Sets the number of copies to be printed.
Output - Output Tray
Sets [Default], [Main Tray] or [Sub Tray] as [Output Tray].
Each of them can/cannot be set in the following cases:
- [Sub Tray] need to be selected a Finisher on the [Option] tab, respective-
ly.
- When [Staple] is available in [Setup] tab, items other than [Default] and
[Main Tray] cannot be set.
Output - Output Order
Changes the output order.
[Face Down] outputs paper with the printed side facing down.
[Face Up] outputs paper with the printed side facing up.
“(1 to N)” means to output paper starting with the first page.
“(N to 1)” means to output paper starting with the last page.
Output - Collate
Prints the first one set of prints in one lot, and then the second set of prints,
the third set of prints, when printing multiple sets of pages.
Output - Offset
Only when the finisher unit has been setup, select to shift the next position
of each set of print out back and forth when printing multi set of copies.
Output - Skip Blank Page
Does not print the blank pages.
2
Reminder
Blank pages might be printed out even if this is set, depending on the
data in the document.
The [Skip Blank Page] cannot be set in the following cases:
- [Combination] is available in [Setup] or [Special Functions] tab.
Output - User Authentication/Account Track
Sets the User Authentication mode/Account Track.