Chapter 4 How to Use the Operator Panel
72
■
Checking the information
1
Press the power button on the front of the scanner.
D
[Ready] is displayed on the LCD.
2
Press the [Menu] button.
D
[Main Menu] is displayed on the LCD.
3
Press the [
U
] or [
V
] button and select [Information], then
press the [Function/Enter] button to confirm.
D
[Information] is displayed on the LCD.
4
Press the [
U
] or [
V
] button to check the contents of the
information.
You can check the messages for replacing consumables/cleaning/
replacing maintenance parts/regular maintenance.
When the message prompts replacing consumables/maintenance
parts or cleaning, the corresponding counter that requires
consumable replacement/maintenance part replacement/cleaning is
highlighted.
Counters will appear highlighted when:
z
The page count after replacing the consumable reaches 95% of the
value configured in
"Specifying the Cycle to Replace Consumables
[Life Counter Alarm Setting]" (page 185)
in the Software Operation
Panel. (For brake roller/pick roller/separator roller counters)
z
The scanner determines that the condition of the roller has
exceeded the threshold that can be corrected, by monitoring the
wear on the roller. (For assist roller counter)
z
The page count after cleaning reaches 100% of the value
configured in
"Specifying the Cycle to Clean the Scanner [Cleaning
in the Software Operation Panel. (Cleaning
counter)
z
The amount of remaining ink reaches below 33%. This is only
displayed when the imprinter is installed. (For [Ink Level: Front] /
[Ink Level: Back]
Function
/Enter
Check
Menu
Scan
Stop
Eject
Counter
Reset
iMFF
Send to
/Pause
Clear
/Back
c
Power Button
d
[Menu] Button
e
[
U
] / [
V
] Button
[Function/Enter] Button
f
[
U
] / [
V
] Button
[Information] can be selected only when there is a
message for replacing consumables/cleaning/replacing
maintenance parts/regular maintenance.
