Chapter 9 Operational Settings
185
Specifying the Cycle to Replace Consumables
[Life Counter Alarm Setting]
You can specify the replacement cycle of the consumables.
The background color of the counter changes to light yellow
when the page count after replacing the consumable reaches
95% of the value specified here, and turns yellow when it
reaches 100%. You can also display the message for
replacing consumables
1
Start up the Software Operation Panel.
"9.1 Starting Up the Software Operation Panel" (page 170)
.
2
From the listing on the left, select [Device Setting 2]
J
[Life Counter Alarm Setting].
3
Specify a value for the life cycle for replacing each
consumable (Pick roller, separator roller and brake roller).
The specifiable value is from 10,000 to 2,550,000 in increments of
10,000.
