Chapter 9 Operational Settings
202
Specifying the Sensitivity Level for Paper
Protection [Paper Protection Sensitivity]
You can specify the level of sensitivity to detect an abnormal
feeding of documents when Paper Protection is enabled.
Documents are deformed (e.g. warped, bent, creased) when
they are not being fed by the rollers properly. To detect such a
symptom and stop the scan, select [1: Low] to only detect
documents that are highly deformed, and [3: High] to also
detect documents that are slightly deformed.
1
Start up the Software Operation Panel.
"9.1 Starting Up the Software Operation Panel" (page 170)
.
2
From the listing on the left, select [Device Setting 2]
J
[Paper Protection Sensitivity].
3
Specify the sensitivity level for Paper Protection.
Low:
Decreases the sensitivity level to detect warped
documents.
Normal: Monitors the documents in normal sensitivity. Keep this
setting for normal use.
High:
Increases the sensitivity level to detect warped
documents.
z
If a paper jam occurs at feeding position frequently,
select [Low].
z
This setting can also be configured from the operator
panel. Note that you can prioritize the operator panel
setting.
