Chapter 4 How to Use the Operator Panel
61
The operator panel consists of an LCD, buttons and LED.
Names and Functions of the Operator Panel
4.1 Operator Panel
Function
/Enter
Check
Menu
Scan
Stop
Eject
Counter
Reset
iMFF
Send to
/Pause
Clear
/Back
Check LED
Lights in orange when an error occurs.
Flashes when consumables reach the end of
the life cycle.
LCD
Indicates the status of the scanner.
[Function/Enter] Button
Confirms the selected item.
Switches the number (No.01 to No.50 / No.C)
for the application launched by pressing the
[Send to/Pause] button.
[Send to/Pause] Button (*1)
Launches the linked application software.
Pauses the scan.
[Scan] Button (*1)
Launches the linked application software.
Resumes the scan.
Power Button
Turns the power ON/OFF.
Lights in blue when the scanner is
turned on.
[Stop] Button
Stops the scan immediately.
[Menu] Button
Configures various types of scanning
operations.
[
U
] / [
V
] Button
Switches the selected item.
Changes the paper separation force.
[Clear/Back] Button
Cancels the selected item and returns to the
previous screen.
Clears the displayed error indication.
[iMFF] Button
Changes the settings for Intelligent Multifeed function when
pressed down (for more than two seconds). Determines
whether or not to memorize the pattern if pressed when a
multifeed occurs.
[Counter Reset] Button
Resets the page counter.
Stops the scan when pressed while scanning
in Manual Feed mode.
[Eject] Button
Ejects the document when a multifeed occurs.
*1: For information on how to scan by using the [Scan] button or [Send to/Pause] button, refer to the FUJITSU TWAIN 32 Scanner Driver Help
provided in the SETUP DISK DVD-ROM or
"Using a Button on the Scanner to Start Scanning" (page 110)
