Chapter 9 Operational Settings
218
Imprinter Settings [Imprinter selection]
Specify which imprinter to use when both Front-Side Imprinter
and Back-Side Imprinter are installed.
This setting does not appear when no imprinter is installed.
1
Start up the Software Operation Panel.
"9.1 Starting Up the Software Operation Panel" (page 170)
.
2
From the listing on the left, click [Device Setting 2]
J
[Imprinter selection].
3
Select the Imprinter to use.
Normal
(obey Host specification):
Follows the scanner driver setting.
Forcibly select Front-Side
Imprinter:
Forces the Front-Side Imprinter to be
used unless specified otherwise by
the scanner driver.
Forcibly select Back-Side
Imprinter:
Forces the Back-Side Imprinter to be
used unless specified otherwise by
the scanner driver.
z
For information about the Imprinter, refer to
z
This setting can also be configured from the scanner
driver’s setup dialog box. Note that priority is given to
the scanner driver setting.
