Chapter 9 Operational Settings
193
Shortening the Scanning Intervals [Pre-Pick]
“Pre-Pick” refers to feeding the document to the starting
position for scanning before the next scan.
Enabling [Pre-Pick] shortens the interval between scanning
each document.
1
Start up the Software Operation Panel.
"9.1 Starting Up the Software Operation Panel" (page 170)
.
2
From the listing on the left, select [Device Setting 2]
J
[Pre-Pick].
3
Configure settings for pre-picking.
Select [Yes] to enable and [No] to disable Pre-pick.
z
If you cancel in the middle of scanning while Pre-Pick
is enabled, you will have to remove the pre-picked
document, then load the document again.
z
This setting can also be configured from the scanner
driver’s setup dialog box. Note that priority is given to
the scanner driver setting.
z
This setting does NOT appear when Kofax VRS is
used.
